July 01, is a big day in the history of SWITEK and SWITEK DIYable 3 Axis servo robot arm. The first SWITEK DIYable 3 axis robot was installed and programmed successfully by the engineer of SWITEK Portugal distributor with the online instruction of SWITEK engineers at home.

DIYable 3 axis servo injection molding automation robot is a new project of SWITEK to expand the overseas’ market. The objective of this project is to put on market a DIYable 3 axis robot arm for injection molding automation of which any engineer who is well trained of electricity security will be able to proceed the installation, programming and testing of the robot under the instruction of the manual or online instruction of the engineers from SWITEK. This project has below advantages:

1) Economic: With optimized structure, the volume of the robot was reduced to 2/5 of the original size, which would help to reduce the shipping cost of the 3 axis servo robot arm.

2) Detailed manual will help the engineer to assemble the robot step by step.

3) On line technical support will help the engineer to set the parameter of the robot step by step.

4) After successful installation, it’ll help the engineer to know the robot better and would be easier for the engineer to proceed the maintenance and increase the production efficiency of the robot.

5) Ready in stock 3 axis servo robot will make the just in time delivery of the order possible, this project will help to reduce the delivery of a 3 axis servo robot from 45 days to 7 days.

The cooperation of the standard 3 axis servo robot with our Portugal distributor is a trial of our DIYable injection molding automation robot project which proofed to be successful. It seems that a DIYable 3 axis servo robot for injection molding automation tend to be interested by international buyers because of the high cost of shipping and after sales service. With modular design, SWITEK make the installation and programming of a 3 axis servo robot an easy task.

“By 2020, the overseas sales of SWITEK robots will increase to 50% of the total turn over”, says Mr. Tim, the CEO of SWITEK Technology Automation Co., Ltd. To achieve this goal, the DIYable 3 axis servo robot arm project would the key in the international market share expansion. “If we can make the installation and programming of a 3 axis servo robot an easy task, with reduced shipping and after service cost, 3 axis servo robot for injection molding automation manufactured by SWITEK would be unbeatable in international injection molding automation machinery market”, says Mr. Tim, the CEO of SWITEK Technology Automation Co., Ltd.