Injection molding automation stems from the need to degating. Some parts dimension out of specification during injection, lead to nozzle clogging. To solve this problem, swing machine arm robot came into being.

The swing machine arm is the simplest pneumatic robot with low cost, easy installation and simple structure, and has been widely used in the cold runner injection molding process of small products. It  can be rotated 90 degrees left and right under the drive of the  air cylinder to complete the removal and placement of the nozzle material.The main product of Toolcen is automated robot.The swing machine arm is the simplest pneumatic robot with low cost, easy installation and simple structure, and has been widely used in the cold runner injection molding process of small products. It  can be rotated 90 degrees left and right under the drive of the  air cylinder to complete the removal and placement of the nozzle material.

The large-scale application of servomotors improving the development of injection molding manipulators. The introduction of the servo system has brought big changes to the processing accuracy, range of activities and production efficiency of the robot. The single-axis servo robot can quickly take out the product and put it on the transport tape, which greatly improves the production efficiency.

The two-axis servo robot of Switek can well take out and stack products. The knife, fork and spoon packaging system realizes the fully automated operation of taking out-stacking-packaging.

Switek developed a three-axis servo robot. Because the high-precision servo motor can achieve any angle of rotation, the three-axis servo robot is widely used in the removal, stacking, and automatic packaging systems of thin-walled products automation.